3860+ MRI IV Infusion Pump

WORLD’S FIRST AND ONLY NON-MAGNETIC INFUSION PUMP

Introducing the 3860+ MRI IV Infusion Pump

The MRidium® 3860+ MRI IV Infusion System meets the demanding clinical needs of today’s patients, by allowing continuous delivery of fluids and medication throughout the MRI care cycle. The non-magnetic design allows the MRidium® infusion pump to operate safely in ultra high magnetic fields without the need for workarounds typically required with traditional infusion pumps. 

Using a traditional pump near an MRI scanner has the following risks:

  • Erratic Performance

  • Infusion Flow Accuracy

  • Occlusion Alarm Delay

  • MRI Image Artifact

  • Projectile Hazard

IRadimed 3860+ Non-Magnetic MRI IV Pump

3860+ Non-Magnetic MRI IV Pump

The non-magnetic MRidium® 3860+ / 3860 and its ability to infuse medications within the MRI environment maintains the same standard of care experienced in the ICU. 

MRidium IV Pump

IRadimed 3861 Non-Magnetic Sidecar Channel

3861 Non-Magnetic Sidecar

The MRIdium® with additional Sidecar Channel offers a unique and effective way to deliver multiple IV fluids, safely and accurately next to the MRI system.

MRidium Sidecar Channel

IRadimed 1145 DERS: Dose Error Reduction Software

1145 DERS: Dose Error Reduction Software

Designed to reduce infusion errors, the DERS custom drug library enhances infusion safety, provides potential cost savings and allows compliance with ISMP and The Joint Commission. 

MRidium DERS Software

IRadimed 3865 Wireless Control Room Display

3865 Wireless Control Room Display

The Wireless Remote eliminates delays caused by stopping the MRI scan to titrate or bolus by providing clinicians full operation from the MRI control room.

Wireless Remote Control

IRadimed 1170 Fiber-Optic SpO2 Monitoring

1170 Fiber-Optic SpO2 Monitoring

Infusing medications at the bore is the safest choice for your patients:

The integrated Masimo SET® SpO2 monitoring capability provides additional monitoring capability when transporting patients to and from MRI. 

Fiber-Optic SpO2 Sensor

Finally, an efficient way to transport out critical patients to the MRI.”

The days of transferring a patient from traditional transport equipment to the MRI monitor & MRI IV pump in the hallway outside of the MRI suite is now a thing of the past. IRadimed non-magnetic devices are small, lightweight, and easy to use and designed to travel with the patient between the MRI suite and their care unit. These unique transport attributes increase MRI efficiency while decreasing the amount of time critically ill patients are away from their care unit.

Transferring the patient to the MRI monitor in the originating department such as an Intensive Care Unit, Emergency Department or Anesthesia induction room reduces the need for unnecessary equipment transfers providing the following benefits:

  • Reduction in Time Critical Patients are ‘Off Unit’

  • ‘Continuity of Care’ During Inter-Departmental Transports

  • Efficient Use of the MRI Scanner and Increased Patient Throughput

  • Expedited MRI Diagnosis

MRI Care Cycle

IRadimed Pre MRI Set-Up

1. Pre MRI Set-Up

Connecting the non-magnetic MRI patient monitor and MRI IV pump to the patient within the ‘safety-net’ of their care unit maintains patient stability prior to their MRI appointment.
IRadimed Transport to MRI

2. Transport to MRI

IRadimed's lightweight devices allow a single staff member to easily transport the patient to the MRI department without the need to transfer monitors again once they arrive.
IRadimed MRI Exam

3. MRI Exam

With their non-magnetic rating and small footprint, clinicians have the freedom to position  the MRI monitor & IV pump where it best enhances patient care for the required procedure.
IRadimed Return Transport

4. Return Transport

Using the 3880 MRI monitor for the entire care cycle helps streamline patient transitions and maintains patient care without a lapse in monitoring during equipment transfers.
IRadimed Post MRI Exam

5. Post MRI Exam

Whether it is the patient’s originating department or a recovery area, IRadimed products are with you and your patient every step of the way to ensure continuity of care. 

Portable IV Infusion Pump Features

The MRidium™ 3860+ helps replace 'work around' solutions like running long lines from conventional pumps through a sealed MRI door or wave guide. The 'work around' practice of placing long lines from outside the MRI control room may lead to questionable flow rates and alarm delays due to line occlusions, increased infection rates and costly medication waste.

IRadimed 3880 Non-Magnetic Patient Monitoring System

Request Info & Pricing

See if you qualify for a discount on our non-magnetic IV pump.